QWERTY Keypad for Samsung Monte

First Download these..

• Multiloader 5.62

http://www.4shared.com/file/yEs1I2GK/MultiLoader_V562.html

• S5620JTJL2

http://www.mediafire.com/?wuc89yt256plj1m#1

• Samsung monte's USB cable
• And Your Samsung Mote

Now lets get started, we are going to flash your Monte to a new Firmware.

WARNING - Flashing is a risky process, it may brick your phone. So understand each and every step and do it at your own Risk.

If you follow my steps correctly then you will flash successfully...

The most important thing is to make sure you don't have SIMLOCK OR NETWORK lock ON (input *#7465625# to keyboard and you will see) If you have network lock on, there's 50/50 chance you will brick your phone, but if you have simlock on, you will always brick your phone. I suggest, if you have a lock ON, DO NOT FLASH!

After Downloading the above links, First Backup everything, Phone book, messages, my files using Kies. 

Lets get started....

1. Back up your files.
2. Press *#7465625# (Make sure You don't have any Sim lock) IMPORTANT
3. Unzip the firmware where you can find later.

This is how your unzipped firmware looks. Obviously  there is nothing to do hear now. :) well

   4. Now open the Multiloader

   5.Select BRCM2153

 6. Now tick Boot change and Full Download

 7. Now click Boot and select the Directory where you have unzipped your firmware.

8. After "boot" click the "Amss" and and in the window open amss.
9.Followed by Apps, Rsrc1 , Rsrc2 [ Select Rsrc2_S5620(Low).rc2].
10. Factory FS, CSC , SHP APP and PFS
11. Leave the FOTA , Tune, ETC blanck.
12. Now remove the sim card and memory card from Your Monte. Make sure you checked the Sim lock
13. Now switch off the phone, Press Down arrow button(in volume Control) and Camera button and the power button (ie the red button)
14. After 4 sec, your phone will be in Download mode.
15.Now Click "Port Search" in Multiloader.
16. Take a deep breath Make sure you have checked all the files correctly, If anything goes wrong you will brick your phone.
17. check that you have selected all files correctly.
18.Now click Download...
19. Just relax for some time and now after the completion of 100% ,  Your phone will automatically reboot with a new firmware.
20. If anything goes wrong, Dont panic. dont try to turn on your phone. Go ahed and do the steps one more time. Please dont Switch on Your phone.
Every thing is done............

Now when you rotate you phone, You will get A nice cute QWERTY keypad.
Enjoy.....
 In my next post will see how to change Monte's appearance.....